Adopt 96 pixel latent upscale overlap

This commit is contained in:
Morpheus
2026-10-09 11:51:51 +00:00
parent e026701e47
commit b7e920998d
5 changed files with 43 additions and 5 deletions
@@ -63,6 +63,7 @@ The initial aspect ratio must remain 16:9 and the same final target must be used
- SLU-16: quality-first combination, accepting a longer runtime if the visual improvement is clear
- SLU-17: practical production combination targeting a predictable sub-hour render
- SLU-18: rectangular 1024×640 tile shape with four effective tile passes
- SLU-19: 96px spatial overlap on the accepted 1024×640 rectangular tile layout
## First two runs
@@ -86,11 +87,12 @@ These are the valid runs recorded so far. Runtime is wall-clock generation time;
| SLU-08 | 672×384 → 1920×1088 | 864×480 | 31m 13s | 14.93 min/Mpx | 1920×1088 | Valid; visual comparison pending |
| SLU-11 | 768×432 → 1920×1088 | 768×768 | 31m 07s | 14.91 min/Mpx | 1920×1088 | Valid; review pending |
| SLU-18 | 672×384 → 1920×1088 | 1024×640 | **25m 14s** | **12.08 min/Mpx** | 1920×1088 | **Reviewed; new current best** |
| SLU-19 | 672×384 → 1920×1088 | 1024×640, 96px overlap | **18m 11s** | **8.71 min/Mpx** | 1920×1088 | **Reviewed; accepted current best** |
### Current best
**SLU-18 is now the current best baseline**: 672×384 initial generation, 1024×640 tiles in a 2×2 layout, 128-pixel overlap and a 1920×1088 output. It was reviewed and accepted as good quality. At 25m 14s it is 47 seconds faster than SLU-07 and has the best normalized throughput so far at 12.08 min/Mpx. The attention `keep_percent 5` test was slower at 31m 05s, so the baseline value of 10 remains in use. SLU-06 remains a good fallback at 26m 52s. SLU-11 did not improve runtime because its larger initial generation took 31m 07s.
**SLU-19 is now the current best baseline**: 672×384 initial generation, 1024×640 tiles in a 2×2 layout, 96-pixel overlap and a 1920×1088 output. It was reviewed and accepted with good quality and no visible seams. At 18m 11s it is below the 20-minute target and has the best normalized throughput so far at 8.71 min/Mpx. The attention `keep_percent 5` test was slower at 31m 05s, so the baseline value of 10 remains in use. SLU-18 remains the same tile shape with 128px overlap at 25m 14s.
SLU-09 full-frame/no-split failed with GPU out-of-memory on the 8 GB card and is not a viable baseline. The tracked `workflow.json` now uses the SLU-18 settings. Static prompt, seed, references, model, samplers, schedulers, steps, denoise and final target remain unchanged.
The earlier tile submissions that produced 1024×1024 output are excluded from this table because their target-resolution override was not applied.
The earlier tile submissions that produced 1024×1024 output are excluded from this table because their target-resolution override was not applied. The current baseline uses 96px overlap; further reductions should only be attempted if a visible-seam comparison is worthwhile.
@@ -0,0 +1,36 @@
{
"test_id": "SLU-19",
"prompt_id": "b57e74fe-25ec-4f1d-8be7-8600218d6907",
"runtime_seconds": 1090.781,
"seed": 317182692766673,
"initial_dimensions": [672, 384],
"target_dimensions": [1920, 1080],
"frames": 243,
"fps": 24,
"initial_steps": 8,
"initial_sampler": "euler",
"initial_scheduler": "beta",
"latent_refinement_steps": 3,
"latent_refinement_sampler": "sa_solver",
"latent_refinement_scheduler": "simple",
"tile_width": 1024,
"tile_height": 640,
"grid_rows": 2,
"grid_cols": 2,
"spatial_w_overlap": 96,
"spatial_h_overlap": 96,
"source_output": {
"filename": "SLU-OVERLAP-96_00001.mp4",
"subfolder": "",
"type": "output",
"fps": 24,
"frames": 243,
"width": 1920,
"height": 1088,
"format": "video/mp4"
},
"output_bytes": 20205794,
"valid": true,
"visual_review": "accepted as current best; no visible seams and quality remained good",
"motion_review": "accepted; stable in review"
}
@@ -22,6 +22,6 @@
}
},
"test_ids": [
"SLU-01", "SLU-02", "SLU-03", "SLU-04", "SLU-05", "SLU-06", "SLU-07", "SLU-08", "SLU-09", "SLU-10", "SLU-11", "SLU-12", "SLU-13", "SLU-14", "SLU-15", "SLU-16", "SLU-17", "SLU-18"
"SLU-01", "SLU-02", "SLU-03", "SLU-04", "SLU-05", "SLU-06", "SLU-07", "SLU-08", "SLU-09", "SLU-10", "SLU-11", "SLU-12", "SLU-13", "SLU-14", "SLU-15", "SLU-16", "SLU-17", "SLU-18", "SLU-19"
]
}
@@ -512,8 +512,8 @@
"tile_height": 640,
"grid_rows": 2,
"grid_cols": 2,
"spatial_w_overlap": 128,
"spatial_h_overlap": 128,
"spatial_w_overlap": 96,
"spatial_h_overlap": 96,
"fade_width": 64,
"fade_height": 64,
"min_tile_size": 256,